Up to a months average usage from one set of filters.

Panoramic Impact Visor: Optical class 1 visor.

Force™10 Typhoon™ comes complete with a replaceable peel-off visor protector to prolong its life. With the ability to fit PressToCheck™ filters the user can feel reassured of an excellent fit.

One of the lightest full face masks on the market and with an excellent Face Seal: Extensive research has been carried out by NIOSH (ISO16976-2) to distinguish the world’s 5 most common facial shapes. Using this research JSP have digitally optimised the ergonomics of the Force®10 Typhoon’s™ face seal to maximise wearer compatibility. • Unrivalled User Serviceability: The Force®10 Typhoon™ has been meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.

Compatible with PressToCheck™ Filters (Not included).

Typhoon™ exhalation valve for reduced breathing resistance (Patent pending)

Engineered for easy maintenance.

The unique Typhoon™ valve has been designed to reduce breathing resistance, heat and moisture build-up. The valve is unaffected by any moisture and can be used with the same performance under very low temperatures (-40°c tested).

The Force®10 Typhoon™ is an extremely lightweight, easy to maintain full face mask with panoramic visor. With 3 available sizes, (S,M,L) and the ability to fit PressToCheck™ filters, the user can feel reassured of an excellent fit.

Cleaning advice for Covid19:

Reusable masks such as the Force™8 and Force™10 have been developed with cleaning as part of the design specification. However the cleaning methods used in the products normal application are not suitable for killing the Coronavirus.

Limited trials of different disinfection processes have been carried out. These show positive results when combined with the checks that are detailed in the standard user instructions for the products.

Wipes – Clinell and Isopropyl alcohol - leaving the filters in place on the masks and cleaning all surfaces with the wipes. Allow the mask to air dry. The Force™8 mask harness elastic straps may need to be removed for additional cleaning depending on local requirements.

Immersion – solutions of Milton™, Actichlor™, Hydrogen Peroxide (maximum 3%) - remove the filters from the mask and immerse in a solution diluted as advised by the manufacturer. After the required period, remove and rinse under clean water ensuring all traces of solution are removed. Allow the mask to air dry.

Vapour treatment Hydrogen peroxide – hydrogen peroxide concentrations above 3% will have a detrimental effect on the polymer of the faceseal of the Force™8 and Force™10 masks. This sterilisation process is not suitable for the masks.

Washing - MEIKO TopClean M respirator cleaning and disinfection machine – using program 1 and drying at 50°C in a drying cabinet, disinfectant: EW 80 Mat (Dosing: 1 %) from EW 80 Systeme GmbH. rinse aid: GT 500 from etol-Werk Eberhard Tripp GmbH & Co.

A solution called Tristel can also be used.